Skip to main content

Live Event Monitoring (Event Monitor)

The Event Monitoring module is the real-time security operations center of the S-Safe system. This screen is designed specifically for security guards or control room operators to detect access events early and respond promptly to security incidents.

1. Live Event Log Table​

The upper area displays a continuously updating list of events pushed from door controllers, with no page refresh required (Auto-refresh):

  • Event: The event code classification (e.g., TypeCardID — Card authentication swipe).
  • Time: The exact timestamp accurate to the second when the event occurred on-site.
  • Source: The name of the device or Door that triggered the event (e.g., Main Door CR1).
  • Description: Detailed status of the access attempt (e.g., Request granted: full test, used — Access was approved).
  • Name: The full name of the employee who swiped (if the system successfully matched the identity).
  • Profile Photo: The original profile photo of the employee for the guard to visually compare against the person standing in front of the camera.
  • Status: The accompanying alert signal or logical state.

Live Event Monitoring Interface

2. Integrated Live Camera Monitoring (Live Camera Integration)​

The key advantage of this module is the synchronized integration between Access Control data and the CCTV camera system, displayed in the lower panel:

  • Automatic Stream Activation: When a card swipe event occurs at any door, S-Safe automatically pulls the live video stream from the Camera linked to that door and displays it on screen.
  • Visual Cross-Verification: On-duty personnel can immediately see the real-time footage at the door to check for card fraud (one person swiping for multiple people) or any door jamming or intrusion incidents.
  • Multi-Stream Support: The lower panel is divided into independent grid cells, allowing simultaneous monitoring of multiple camera angles when a series of events occur in quick succession.